Activate certain SSID on certain AP in WLC

[kinwai]

in current environment i have 3SSID , SSID_1, SSID_2 and SSID_3

most AP requires all 3 of them

certain AP in certain location such as in the lobby, i just need SSID_1

is this possible? any hint on this?

[Scott Fella · Accepted solution]

Yes you can. It's called AP Groups. You define a group to broadcast certain SSIDs. Then you can assign APs to that group.

Sent from Cisco Technical Support iPhone App

[kinwai]

Thanks scott ! This will do the trick !

[Scott Fella]

No problem and thanks for using the rating system!

Sent from Cisco Technical Support iPhone App

[Scott Fella]

Here is a good link

https://supportforums.cisco.com/docs/DOC-19033

Sent from Cisco Technical Support iPhone App