cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2811
Views
0
Helpful
4
Replies

AIR-1562e

itscomputers
Level 1
Level 1

Can I install one omni and one directional antenna on a single 1562E access point and use the one for 2.4GHz and the other for 5GHz?

1 Accepted Solution

Accepted Solutions

Look at THIS picture, particularly the right-hand side.  Top ports are for 5 Ghz and the bottom ports are 2.4 Ghz.  
Does this answer your question?

View solution in original post

4 Replies 4

Leo Laohoo
Hall of Fame
Hall of Fame
What antenna are you intending to use.
1562E antennas are usually dual-band.

One AIR-ANT2547VG-N (omni) and one AIR-ANT2588P3M-N= (directional). I Know, they are both dual band. I will rephrase my question. Can I install both of them on a single 1562E. I need to cover an omni area with the AIR-ANT2547VG-N and a downhill steep path with the AIR-ANT2588P3M-N=. If both work as dual band it will be optimal. It is acceptable though, if one needs to work at 2.4GHz and the other at 5GHz.

Thanks

 

Look at THIS picture, particularly the right-hand side.  Top ports are for 5 Ghz and the bottom ports are 2.4 Ghz.  
Does this answer your question?

Yes, thanks!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card