cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1655
Views
5
Helpful
7
Replies

AIR-AP1832I-E-K9 Costume Guest portal

RAJA RAHMAN
Level 1
Level 1

HI 

Please can some help to get the template for the guest portal in AIR-AP1832I controller.

Regards

RR 

1 Accepted Solution

Accepted Solutions

Sandeep Choudhary
VIP Alumni
VIP Alumni

Hi,

If you are using the newer version like...8.3 then you can customize it.

Here is the attached sample web auth file "Login1":

How to setup : http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/83/user_guide/b_ME_User_Guide_83/b_ME_User_Guide_83_chapter_0110.html

Regards

Dont forget to rate helpful posts

View solution in original post

7 Replies 7

Sandeep Choudhary
VIP Alumni
VIP Alumni

Hi,

If you are using the newer version like...8.3 then you can customize it.

Here is the attached sample web auth file "Login1":

How to setup : http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/83/user_guide/b_ME_User_Guide_83/b_ME_User_Guide_83_chapter_0110.html

Regards

Dont forget to rate helpful posts

HI Sandeep ,

as advised i have done  login page 

but the logo is not displaying  please can you help 

i here attached the file what i have uploaded .The same file i made as tar and uploaded .

Regards

RR

I can see the logo in webportal.

you can check by double click on login.html.

Regards

Dont forget to rate helpful posts

HI 

When we see the the preview we are seeing like the attached file  

change this :

<Center><IMG SRC="yourlogo.jpg" align=bottom center></Center>

still not working then try with another browser!!!!

Regards

Dont forget to rate helpful posts

Tried that too no luck 

but when i click in the icon it says image not found 

did you try this command:

<Center><IMG SRC="yourlogo.jpg" align=bottom center></Center>

your logo link must be yourlogo.jpg not png

REgards

Dont forget to rate helpful posts

Review Cisco Networking for a $25 gift card