AIR-AP2702I on the same Switch, some medium some full power

[lksdflkasfjlk]

Hi everyone

We use a 2960X-48 switch with ten AIR-AP2702I-B-K9. In the wlc eight show up with PoE/Medium Power (15.4 W) two PoE/Full Power.

Switch allows 30w on every port. CDP is enabled. Any idea what could be the cause?

We have other switches with all APs running full power, and some switches where one out of 10 runs 15.4w.

Thanks in advance.

[Sandeep Choudhary · Accepted solution]

Try it:

Set the power static max by using command "power inline static max XX"

Regards

Dont forget to rate helpful posts

[lksdflkasfjlk]

We did not set power inline to static but rebooted the APs. Now they are all full power.

Thank you anyway!

[Sandeep Choudhary]

Glad that you resolved the issue.