05-16-2017 02:18 AM - edited 07-05-2021 07:02 AM
Hi everyone
We use a 2960X-48 switch with ten AIR-AP2702I-B-K9. In the wlc eight show up with PoE/Medium Power (15.4 W) two PoE/Full Power.
Switch allows 30w on every port. CDP is enabled. Any idea what could be the cause?
We have other switches with all APs running full power, and some switches where one out of 10 runs 15.4w.
Thanks in advance.
Solved! Go to Solution.
05-16-2017 02:50 AM
Try it:
Set the power static max by using command "power inline static max XX"
Regards
Dont forget to rate helpful posts
05-16-2017 02:50 AM
Try it:
Set the power static max by using command "power inline static max XX"
Regards
Dont forget to rate helpful posts
05-16-2017 04:05 AM
We did not set power inline to static but rebooted the APs. Now they are all full power.
Thank you anyway!
05-16-2017 04:11 AM
Glad that you resolved the issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide