AIR-AP3702I lighweight to be configured as autonomous/standalone

[adeebtaqui]

Hi All,

Can someone please share their experience/knowledge for my scenario of converting lightweight AP AIR-AP3702I after erasing its configuration to an auotnomous/standalone AP as new WLC is not avilable.

[Sandeep Choudhary]

1. convert LAP to autonomous ap:

 how to so it:

https://www.youtube.com/watch?v=c70mOOpqMsg

https://www.speaknetworks.com/converting-cisco-wireless-access-point-lightweight-mode-autonomous-mode-vice-versa/

https://damn.technology/convert-cisco-lightweight-ap-autonomous

2. Configure it:

https://rscciew.wordpress.com/2014/05/24/single-ssid-configuration-on-autonomous-ap/

https://nickjvturner.com/2017/01/20/autonomous-cisco-ap-multiple-ssids/

https://www.cisco.com/c/en/us/support/docs/interfaces-modules/security-modules-routers-switches/116586-config-ap-00.html

Regards

Dont forget to rate helpful posts

[adeebtaqui]

Thanks Sandeep

The AP config has been erased after removal from wlc 5520.

Now i tried to console the AP to convert it into standalone config but after booting its asking username and password and saying no wlc detected

Is it to be password reset? Can it be made autonomous from lwap?

[Leo Laohoo]

Using a TFTP Server to Return to a Previous Release