Air-Cap1532E-E-K9 at WLC 2504 failed

[Hans Juergen Guenter]

Hello,
I currently have the following problem. In my test environment
I was able to successfully test the following AP. However, now
at the customer, this AP cannot connect to the WLC.
It is an AIR-CAP1532E-E-K9. The other APs are AIR-AP3802I-E-K9.
Can someone help me and tell me what I can do so that the AP
can also be managed by the WLC?
Here are the error messages I get in the WLC under log:

Spoiler

*spamApTask4: Apr 21 16:00:39.083: %CAPWAP-3-POST_DECODE_ERR: capwap_ac_sm.c:6548 Post decode processing failed for Config status from AP 70:61:7b:c5:40:e0
*spamApTask4: Apr 21 16:00:39.082: %CAPWAP-3-DTLS_CLOSED_ERR: capwap_ac_sm.c:7130 70:61:7b:c5:40:e0: DTLS connection closed forAP 192:168:10:66 (5248), Controller: 192:168:10:20 (5246) Regulatory Domain Mismatch
*spamApTask4: Apr 21 16:00:39.082: %LWAPP-3-RD_ERR4: capwap_ac_sm.c:3460 The system detects an invalid regulatory domain 802.11bg:-E 802.11a:-E for AP 70:61:7b:c5:40:e0
*spamApTask4: Apr 21 16:00:39.082: %LOG-3-Q_IND: spam_lrad.c:12263 Country code (US) not configured for AP 70:61:7b:c5:40:e0[...It occurred 2 times.!]
*spamApTask4: Apr 21 16:00:39.080: %LWAPP-3-RD_ERR8: spam_lrad.c:12263 Country code (US) not configured for AP 70:61:7b:c5:40:e0
*spamApTask2: Apr 21 16:00:30.050: %CAPWAP-3-POST_DECODE_ERR: capwap_ac_sm.c:6548 Post decode processing failed for Config status from AP 70:61:7b:b1:20:80

[Flavio Miranda]

Yes, you will imstall like any software upgrade and the wlc need to be reload after the upgrade. 

 Use "reset system" commamd or use the web page for it

[Hans Juergen Guenter]

Hi,

I got the file and I think today I get the AP1532 to test it. After
the Test I will post the result.

Best Regards

Hans-Jürgen Günter

[Hans Juergen Guenter]

Hi everybody,

Today I will test my test environment to see if it can now connect the
AP1532 to the WLC. After the test I will post the result briefly and
then I think this post can also be closed if the test is successful.

So I'll get back to you here later.

[Hans Juergen Guenter]

Hi,

yesterday I tested the AP1532 with my test enviroment. The AP1532
can connect to the WLC and I can connect to the internal WLAN and
the guest WLAN. Both can surf into the internet.

Thanks to all they help me.

[Hans Juergen Guenter · Accepted solution]

Hello,

So the solution to the problem was that although the WLC had the right
IOS, the bundle for the external AP was still missing.

So in addition to:
AS_5500_8_5_182_7.aes

and that:
AP_BUNDLE_5500_8_5_182_7.aes

Installed.
Then I reloaded the WLC and then I could see on the console of the AP1532
and in the web interface of the WLC2504 that the AP1532 had connected to
the WLC. Then I logged into the internal WLAN and checked whether I could
access the WLAN with a client. Then then also tested whether I have access
to the guest WLAN and thus also come to the Internet. Both of these worked.

The post is now considered solved.