AIR-CAP3502I run both 2.4Ghz and 5Ghz simultaneously?

[Eric Daoust]

Can i run both 2.4 and 5ghz at the same time? so my N user's can connect at 300Mpbs on the 5ghz bonded, and my G users can connect to 54Mbps?

Also i ask because of coverage, my 5ghz does not cover as far as the 2.4 so those at the extremity's could at least get G with a good signal

Thanks

[Stephen Rodriguez]

you sure can!

just need to configure the SSID under both the radi0 and radio1 interfaces.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

[Scott Fella]

The 5ghz being a higher frequency doesn't travel as far as the 2.4ghz. Like Steve mentioned you can run an SSID on both radios since you have a Lightweight Access Point. This does require a a WLC.

Sent from Cisco Technical Support iPhone App

[Stephen Rodriguez]

or convert it to run aIOS

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

[Scott Fella]

Here are the conversion links:

Using a TFTP Server to Return to a Previous Release

http://www.youtube.com/watch?v=QQ_NuxdRhQ4

https://supportforums.cisco.com/docs/DOC-14960

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"