cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1076
Views
7
Helpful
3
Replies

Aironet 1040 Serien, Can limit users in SSID?

Alex Alvarez
Level 1
Level 1

Some time ago have this question, and now is a problem, because a ssid have more users than workstations!

Anyone little help?¡

2 Accepted Solutions

Accepted Solutions

Sandeep Choudhary
VIP Alumni
VIP Alumni

Do you have this AP in autonomous mode or Lightweight mode ???

If you this as Lightweight then you can restrict client per WLAN:

Here is the procedure:

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080b9c159.shtml

If Autonomous then:

1st method: I am not sure about this method:

You can limit per SSID:

AP(config-ssid)# max-associations 20

The above example allows for 20 clients only to connect to the SSID. Change the number as you need.

2nd:

You can use mac filter.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080c1e40b.shtml

Regards

Dont forget to rate helpful posts

View solution in original post

kaaftab
Level 4
Level 4

You can use the command

 AP#max-association

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/12-2_13_JA/configuration/guide/i12213sc/s13ssid.html

to limit the users but do the capacity planning before limiting the users

 

View solution in original post

3 Replies 3

Sandeep Choudhary
VIP Alumni
VIP Alumni

Do you have this AP in autonomous mode or Lightweight mode ???

If you this as Lightweight then you can restrict client per WLAN:

Here is the procedure:

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080b9c159.shtml

If Autonomous then:

1st method: I am not sure about this method:

You can limit per SSID:

AP(config-ssid)# max-associations 20

The above example allows for 20 clients only to connect to the SSID. Change the number as you need.

2nd:

You can use mac filter.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080c1e40b.shtml

Regards

Dont forget to rate helpful posts

kaaftab
Level 4
Level 4

You can use the command

 AP#max-association

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/12-2_13_JA/configuration/guide/i12213sc/s13ssid.html

to limit the users but do the capacity planning before limiting the users

 

Abha Jha
Cisco Employee
Cisco Employee

posted below answer :-

 

The below link gives you idea about max allowed clients and also how to limit the maximum clients per WLAN.

You wil have to go to advanced tab of WLAN on WLC and enter the number of maximum clients that can be connected to the given WLAN.

 

http://www.cisco.com/image/gif/paws/113303/restrict-wlan-clients-00.pdf

Review Cisco Networking for a $25 gift card