cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
740
Views
0
Helpful
3
Replies
mwatson
Beginner

Aironet 1140 AP's and DHCP

We have 6 aironet 1140's throughout the office I have them all configed as one ssid but I would like the DHCP to come from our Windows server.  Right now I have set them up with ip dhcp pools.  So what is the secret to get them to send dhcp requests to the Windows server?

Thanks                  

3 REPLIES 3
Scott Fella
Hall of Fame Guru

You need to configure IP helper address on the layer 3 interface. That will send any dhcp request to the dhcp server.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

I have that on my router for that subnet.  Is there any command on the 1140 that I need to enter?

Nope...

All you have to do is configure ip helpder address on L3 device and remove the dhcp pool configuration from AP's. This will ensure that devices pick ip from your wondws dhcp scope.

Hope that helps.

Regards

Najaf

Please rate when applicable or helpful !!!

Create
Recognize Your Peers
Content for Community-Ad