08-22-2007 11:27 AM - edited 07-03-2021 02:31 PM
Hello,
I had to reset my Cisco Aironet 1200 AP.
Now i can't login to the web interface using the default ip 10.0.0.1
Any help?
08-26-2007 02:02 AM
Was it connected to the LAN when you powered it up? If so it may have picked up a DHCP address and you should be able to find it by checking your DHCP server. Alternatively, disconnect it from the LAN and reboot it, it will try (and fail) to get a DHCP address and will revert to the 10.0.0.1 address.
08-31-2007 01:13 AM
thanks!
08-31-2007 03:21 AM
Glad that helped, don't forget to rate my post if you found it helpful : )
08-31-2007 04:57 AM
Hi Andrew,
I have read alot of good posts from you recently :) 5 points for the nice thinking on this one!
Take care,
Rob
08-31-2007 05:00 AM
Rob,
Thanks for the kind words, much appreciated! : )
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide