Aironet 1262N AIR-LAP1262N-A-K9

[server123]

Hello, I have problem in this wirelles router. How to enable web interface via the console? (Port COM1) Command Ip http server is bad.System say unknown command,Why? This device is new.Start device: I hold mode button and switch on power supply.LED is now blinking RED.Take username Cisco and password Cisco and next write command Ip http server,bad is wrong. I work with cisco devices before 4 years, I forgot instrutions for configure

I´m from slovakia,sorry for my english,thank´s

[jasbryan]

Zdeno,

you want to repost this question on this forum

https://supportforums.cisco.com/community/netpro/wireless-mobility/others

Jasbryan

[cindy toy]

Hello,

It is not necessary to re-post.  I have moved this post in to the Other Wireless Mobility Area.

Regards,

Cindy Toy

Cisco Small Business Community Manager

for Cisco Small Business Products

www.cisco.com/go/smallbizsupport

twitter: CiscoSBsupport

[Scott Fella]

You have a LAP1262 which means you need a wireless LAN controller to manage that. That command will not work on those type of access point. If you want a stand alone access point, the model would of been AP1262. So if you want this AP to be stand alone device you will need to convert this from capwap to autonomous. Follow the directions below. You will need to download the 1260 autonomous code from Cisco.

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161272

Sent from Cisco Technical Support iPhone App