cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
366
Views
4
Helpful
3
Replies
Andrade_Michel7
Beginner

Aironet 1532 Standalone

Hi, on the last days i sell a cisco aironet 1532,

the access point can be configured standalone, without a WLC?

Best regards

3 REPLIES 3
Rasika Nayanajith
VIP Mentor

Yes, it can work in Autonomous mode.

you require correct autonomous image (eg ap1g3-k9w7-tar.153-3.JD.tar) if that AP got a lightweigh image on it.

Below post may help in case if you want to convert lightweight to autonomous.

https://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/

https://mrncciew.com/2013/12/13/ap-conversion-using-mode-button/

HTH

Rasika

*** Pls rate all useful responses ***

Thank you so much Rasika,

where can i get the correct image?

i need open a case? or contact cisco support?

Best Regards!!!

You would need to have a smartnet contract on the AP in order to get access to software downloads. If you have a cisco sales guy he might be able to get you access.

******************************************************************************

HTH

Please rate helpful post! 

www.my80211.com - Blog by a WiFi engineer for WiFi engineers

www.wifitraining.com/about-wifi/ - WiFi Training by hands on WiFi Engineers, Experts and Cisco Wireless VIPs

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________
Content for Community-Ad