08-15-2016 02:32 PM - edited 07-05-2021 05:37 AM
Hi, on the last days i sell a cisco aironet 1532,
the access point can be configured standalone, without a WLC?
Best regards
08-15-2016 08:58 PM
Yes, it can work in Autonomous mode.
you require correct autonomous image (eg ap1g3-k9w7-tar.153-3.JD.tar) if that AP got a lightweigh image on it.
Below post may help in case if you want to convert lightweight to autonomous.
https://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/
https://mrncciew.com/2013/12/13/ap-conversion-using-mode-button/
HTH
Rasika
*** Pls rate all useful responses ***
08-16-2016 05:58 AM
Thank you so much Rasika,
where can i get the correct image?
i need open a case? or contact cisco support?
Best Regards!!!
08-16-2016 06:09 AM
You would need to have a smartnet contract on the AP in order to get access to software downloads. If you have a cisco sales guy he might be able to get you access.
******************************************************************************
HTH
Please rate helpful post!
www.my80211.com - Blog by a WiFi engineer for WiFi engineers
www.wifitraining.com/about-wifi/ - WiFi Training by hands on WiFi Engineers, Experts and Cisco Wireless VIPs
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide