cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1360
Views
0
Helpful
7
Replies

Aironet 3802i cleanair down when using 160mhz channels (Mobility Express)

sramgolam
Level 1
Level 1

Hello Everyone,

 

I have a single 3802i with Mobility Express 8.5.131.0 running and whenever I set the 5ghz channel to 160mhz the cleanair status for that radio goes to admin enabled but status down. I've tried this on 8.7 with the same problem. Cleanair works when bandwidth is 20, 40, or 80. But not 160.

 

To reproduce the problem you can do this:

  • Start with fresh ME install
  • Set radio 0 to 2.4ghz only
  • Set radio 1 to 5ghz only
  • Create two wpa2 wlans and set one to 2.4ghz and the other to 5ghz
  • Change the channel bandwidth in RF Optimization expert settings to 160mhz (Make sure cleanair is enabled)

I saw the bug below which describes my problem but its related to the 5500 WLC series.

CSCvk63452

 

Any help would be appreciated.

7 Replies 7

Rasika Nayanajith
VIP Alumni
VIP Alumni