09-20-2013 03:26 AM - edited 07-04-2021 12:53 AM
Hi all,
Is it possible to deploy Aironet 600 with 3850 switch? Or I really need 2500/5500/7500 WLC?
Thank you!
Solved! Go to Solution.
09-20-2013 12:03 PM
NO, As per below OEAP600 is not supported by 3850. So you need any other controller model(like 2504, 5508,etc) to support OEAP600 series.
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps12686/qa_c67-722110.html
Q. Which models of access points can a Cisco Catalyst 3850 switch support?
A. The following models of access points are supported: LAP1040, LAP1142, LAP1260, CAP3500, CAP3600, CAP2600, and CAP1600.
HTH
Rasika
***** Pls rate all useful responses *****
09-20-2013 04:28 AM
Hello Adrian,
This office extend AP can be placed directly to a dmz/router with switch in fashion. The fire wall should allow the capwap channel between you Ap and remote WLC , follow the below deployment
http://www.cisco.com/en/US/products/ps11579/products_tech_note09186a0080b7f10e.shtml
09-20-2013 05:23 AM
I meant to use it with 3850 as a WLC
09-20-2013 04:56 AM
Please check the below link which can give your better understanding about the compatibility matrix:
09-20-2013 12:03 PM
NO, As per below OEAP600 is not supported by 3850. So you need any other controller model(like 2504, 5508,etc) to support OEAP600 series.
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps12686/qa_c67-722110.html
Q. Which models of access points can a Cisco Catalyst 3850 switch support?
A. The following models of access points are supported: LAP1040, LAP1142, LAP1260, CAP3500, CAP3600, CAP2600, and CAP1600.
HTH
Rasika
***** Pls rate all useful responses *****
09-21-2013 10:42 PM
Thank you very much. It seems I have to budget one for next year
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: