05-24-2011 07:40 AM - edited 07-03-2021 08:14 PM
I bougth cisco Aironet 1250 series few days ago, after configuration window 7 clients were able to (Associate) access interrnet through it but window XP clients didn't access internet(associate) through it, after all troubleshooting i decided upgrade to ios version 124-21a.ja2 the previous version was 124-10b.da3. After upgrading the system reported an error unknown and return to ROM and repeat restartin after sometimes and does support copy command to restore previous ios. any one with help i need to make it run
05-24-2011 08:05 AM
Hi,
21a.JA2 is the LWAPP code not IOS.. if we load LWAPP image on to the IOS AP then the reboot is expected since it will search for the WLC to get registered..
If we stil have the AP in LWAPP mode then use the below link to get the AP back to IOS.. (LWAPP to IOS conversion)
https://supportforums.cisco.com/docs/DOC-14960
Download the image from the below link..
lemme know if htis answered ur question and please done forget to rate the usefull posts!!
Regards
Surendra
05-25-2011 01:23 AM
hi
Thanks for your consern,
i have failed to download ios i dont have contract.
can anyone help me pls
Regard
James
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide