02-19-2009 08:55 AM - edited 07-03-2021 05:11 PM
Hi folks,
I'm having issues with our Anchor controller here running 3.2.171.6. Using a chain certificate for our Web authentication re-direct Page to a WEB-server. sometimes the Guest Clients are not re-directed to the WEb authentication page. After I reboot the Anchor this resolves the issue. I need to use this code to support the ipsec vpn module. any ideas would be appreciated.
02-19-2009 10:54 AM
you need to try to find a non-chained certificate. I know that most CA do not use these anymore, but need to find one. WLC does not support chained-certificate until 5.2. It may work, but it is not supported.
HTH,
Steve
02-20-2009 12:27 PM
RapidSSL offers root CA certs which you can use and load onto the wlc to avoid the certificate error issue.
02-25-2009 01:09 AM
My mistake guys , this is in fact a root CA. Wondering if anyone can point me to a bug code that might explain this issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide