- last edited on
i need help immediatly. i have 50 1552e and i need to change ios to autonomous. i send to many post what i have a problem. can any admin help me asap!!!!!
The easiest way to convert is if you can join the mesh ap to a WLC then issue this on the CLI of the WLC.config ap tftp-downgrade tftp-server-ip-address filename access-point-nameIf you don't have a WLC, then it's a bit tricky and you have to look at a few way of doing it.Using a TFTP Server to Return to a Previous Releasehttp://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918https://supportforums.cisco.com/docs/DOC-18268http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918http://www.youtube.com/watch?v=QQ_NuxdRhQ4https://supportforums.cisco.com/docs/DOC-14960Sent from Cisco Technical Support iPhone App
Kindly check the following link (topic already discussed)
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: