09-09-2020 10:53 AM - edited 07-05-2021 12:29 PM
Please help, there is a completely reset AP 1702I-E, vWLC 8.5.161 on which 3602I-E points are connected and work.
Licenses are activated on the controller, the date and time are set correctly, and the correct region is selected.
I use the record: "capwap ap controller ip address (ip)"
When connecting AP 1702 to vWLC I get the message: "Not in Bound state.
*Mar 1 00:04:41.635: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP." But from the AP I successfully ping vWLC.
How do I connect this point to the controller?
09-09-2020 02:46 PM
Try the below command and reload AP. Pls attach the complete output of AP console to see what's happening
capwap ap primary-base <WLC_NAME> <WLC_MGT_IP>
HTH
Rasika
*** Pls rate all useful responses ***
09-10-2020 02:04 PM
Attached the logs below
09-09-2020 04:46 PM
Console into the AP and reboot the AP.
Post the entire bootup process.
09-10-2020 02:04 PM
Attached the logs below
09-10-2020 02:02 PM - edited 09-11-2020 01:46 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide