cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
897
Views
0
Helpful
5
Replies

AP 1702I doesn't connect to the vWLC

-Hellsing-
Level 1
Level 1

Please help, there is a completely reset AP 1702I-E, vWLC 8.5.161 on which 3602I-E points are connected and work.
Licenses are activated on the controller, the date and time are set correctly, and the correct region is selected.

I use the record: "capwap ap controller ip address (ip)"

When connecting AP 1702 to vWLC I get the message: "Not in Bound state.
*Mar 1 00:04:41.635: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP." But from the AP I successfully ping vWLC.

How do I connect this point to the controller?

5 Replies 5

Try the below command and reload AP. Pls attach the complete output of AP console to see what's happening

capwap ap primary-base <WLC_NAME> <WLC_MGT_IP>

 

HTH

Rasika

*** Pls rate all useful responses ***

Attached the logs below

Leo Laohoo
Hall of Fame
Hall of Fame

Console into the AP and reboot the AP. 

Post the entire bootup process.

Attached the logs below

-Hellsing-
Level 1
Level 1

I rebooted the vWLC and now all the APs can't connect, attached the debug with the wlc (capwap events/errors) and AP 1702.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: