07-13-2012 08:34 PM - edited 07-03-2021 10:24 PM
Hi,
I have problem with this 2 AP model 3500i out of 140 APs. below is my finding:-
1. Suspected AP froze with bright white light and dissociated from controller
2. After bounce back (shut / no shut) the port, its working as normal
3. In a while, its repeat to (1.)
4. Direct console to the AP, no output is seen.
From NCS & controller log, its only show as below:
AP 'TTR13-A03AP0076' disassociated from Controller '10.209.116.16'
AP 'TTR4-A02AP0014' disassociated from Controller '10.209.116.15'
Is there anyone having the same issues?
Solved! Go to Solution.
07-13-2012 08:38 PM
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtu24972
Sent from Cisco Technical Support iPad App
07-13-2012 08:37 PM
There is a thread I will try to find, but opening a TAC case is what you probably should do. They can walk you throught the fix, or just RMA.
Sent from Cisco Technical Support iPad App
07-13-2012 08:38 PM
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtu24972
Sent from Cisco Technical Support iPad App
07-13-2012 08:42 PM
Search the forum for this thread:
issues with 3500i AP's LED glowing bright white
Sent from Cisco Technical Support iPad App
07-13-2012 08:58 PM
Thanks Fella. This might help.
07-13-2012 09:01 PM
No problem
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: