cancelar
Mostrando los resultados de 
Buscar en lugar de 
Quiere decir: 
cancel
844
Visitas
5
ÚTIL
2
Respuestas

AP 9115AXI install EWC but keeps in capwap mode.

robertochicote
Level 1
Level 1
Good morning.
We have a problem with the device mentioned above.
We are deploying this AP as EWC on another subnet.
First we install the EWC image and then we only put the IP of the subnet that we want (it is in another physical location).
Once connected to this new location and connecting via ssh to configure, the ap remains in capwap and we don't know how to recover it as EWC. We do a "show version" and it indicates that the EWC images are installed, but it only responds to capwap commands. Attached checks. Is there any way to recover it as EWC by ssh? or does it have to be via console?
At this time we have lost management when trying a capwap reset...
We would appreciate your help. Thank you very much A cordial greeting.
2 RESPUESTAS 2

robertochicote
Level 1
Level 1
@Daniel Ordóñez Flores  Thank you for your quick answer.
We have tried the first command you quote on several occasions and it indicates that the EWC image is already installed (attached screenshot). We have also tested the second command and it doesn't let you insert "wireless" (it's as if it were still in capwap mode) and it only obeys commands in this mode. Doing a "show running-config" we see that the EWC image is installed.
We don't understand what could be happening. We are desperate.
Thanks in advance.
All the best

@robertochicote  ha escrito:
Good morning.
We have a problem with the device mentioned above.
We are deploying this AP as EWC on another subnet.
First we install the EWC image and then we only put the IP of the subnet that we want (it is in another physical location).
Once connected to this new location and connecting via ssh to configure, the ap remains in capwap and we don't know how to recover it as EWC. We do a "show version" and it indicates that the EWC images are installed, but it only responds to capwap commands. Attached checks. Is there any way to recover it as EWC by ssh? or does it have to be via console?
At this time we have lost management when trying a capwap reset...
We would appreciate your help. Thank you very much A cordial greeting.

let me try it tonight at house and I will let you know

Espero que la información haya sido útil y si no tienes más preguntas recuerda cerrar el topic, seleccionando la respuesta como "Respuesta correcta"
**Please rate the answer if this information was useful***
**Por favor si la información fue util marca esta respuesta como correcta**