04-08-2015 01:59 PM - edited 07-05-2021 02:52 AM
Hello Experts,
Wireless controller summary page displays the AP & radio 0 & 1 up/down status.
Is there an easy way to find the AP which is affected?
Right now I have to go through all the AP's and see the status.
Your idea & suggestions will be highly appreciated.
Thanks in advance,
04-08-2015 03:11 PM
I can think of three possible solutions for this:
1. If all of your AP's have CleanAir enabled you can filter on "CleanAir Oper Status" in the web GUI
2. Use the following command on the CLI:
(WLC) >grep include "DOWN" "show advanced 802.11a sum"
3. Use Cisco Prime Infrastructure as monitoring tooling
Please rate useful posts :-)
04-08-2015 05:31 PM
Thank you very much Freerk,
In my environment we have many APs 1242 model so clean air is not available.
and this is the output of the command & one AP radio1 is down.
Thanks again in advance for any explanation. what I understand is this commands output will also depend on clean air enabled APs only, please correct me if, I am right.
04-09-2015 02:23 PM
The command is case-sensitive, so it needs to be "DOWN" instead of "down". You don't need CleanAir access-points for getting the correct output with this command.
Please rate useful posts :-)
04-10-2015 11:11 AM
Thank you very much Freerk!!
It worked and very useful command.
Thanks!!
04-09-2015 11:03 PM
HI Lenka,
As per your screenshot, your 5 APs Slot1 (5Ghz) is down.
and you want to know that which AP having this problem right ?
Go to Wireless > Access Points>Radios >802.11a
Here you will see the complete list of APs with Radio status.
See the screenshot:
Regards
Don't forget to rate helpful posts
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: