cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
490
Views
2
Helpful
2
Replies

AP1240 and ACS INTEGRATION HELP REQUIRED

urarindam
Level 1
Level 1

Hi

I need configuration guide to integrate AP and ACS using MAC authentication of Wireless Card..

arindam

2 Replies 2

Complete these steps in order to configure MAC authentication using a RADIUS server. In this example, the Cisco Secure ACS server is used as the RADIUS server.

Configure a WLAN and Enable MAC Filtering

Configure the RADIUS Server with Client MAC Addresses

Configure a WLAN and Enable MAC Filtering
Complete these steps in order to configure a WLAN with MAC filtering:

Click WLANs from the controller GUI in order to create a WLAN.

The WLANs window appears. This window lists the WLANs configured on the controller.

Click New in order to configure a new WLAN.

In this example, the WLAN is named MAC-ACS-WLAN and the WLAN ID is 2.

Review Cisco Networking for a $25 gift card