AP2803I is not joining the WLC C9800

[osman869]

Hi, 

I have an AP 2803 version 8.4 and WLC c9800 version 17.6.2

DHCP is enabled on WLC and AP is getting the IP but its showing this only. 

(AP and WLC can ping each other)

AP>[*06/18/2019 07:13:28.8565] CAPWAP State: Discovery
[*06/18/2019 07:13:28.8576] Discovery Request sent to 10.80.102.12, discovery type STATIC_CONFIG(1)
[*06/18/2019 07:13:28.8592] Discovery Request sent to 10.80.102.12, discovery type STATIC_CONFIG(1)
[*06/18/2019 07:13:28.8602] Discovery Request sent to 255.255.255.255, discovery type UNKNOWN(0)

..

[Leo Laohoo]

---

@osman869 wrote:

[*06/18/2019 07:13:28.8576] 

---

Look at the time and date.  

[marce1000]

 - Also configure NTP on the 9800 , and or use an ntp service/server

 M.

[David Ritter · Accepted solution]

Don't forget to configure/enable the Wireless Management Interface on the 9800

[osman869]

Thank you, this joined the AP.