Yes, ofcource:
ap_it#reload
Proceed with reload? [confirm]
*Mar 1 04:29:00.238: %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Command.
IOS Bootloader - Starting system.
FLASH CHIP: Spansion Mirrorbit (0001)
Xmodem file system is available.
Bringing up flash file system:
flashfs[0]: 147 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31481856
flashfs[0]: Bytes used: 12687360
flashfs[0]: Bytes available: 18794496
flashfs[0]: flashfs fsck took 14 seconds.
Reading cookie from flash parameter block...done.
Base Ethernet MAC address: 64:00:f1:78:08:74
Ethernet Interface initialize.
Ethernet Interface initialize OK.
TFTP initialize OK.
Boot system image.
Loading "flash:/ap801-k9w7-mx.124-10b.JDA3/ap801-k9w7-mx.124-10b.JDA3"...
File "flash:/ap801-k9w7-mx.124-10b.JDA3/ap801-k9w7-mx.124-10b.JDA3" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, AP801 Software (AP801-K9W7-M), Version 12.4(10b)JDA3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Sun 07-Jun-09 04:01 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x01000000
Initializing flashfs...
flashfs[1]: 147 files, 7 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 31481856
flashfs[1]: Bytes used: 12687360
flashfs[1]: Bytes available: 18794496
flashfs[1]: flashfs fsck took 5 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
Warning: the compile-time code checksum does not appear to be present.
Radio 0 0 0 0 0 0 30
Radio 0 0 0 0 0 0 11
tx_paks 0
tx_paks 0
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco AP801GN-E-K9 (PowerPC 8343) processor (revision B0) with 49142K/16384K bytes of memory.
Processor board ID FCZ1539C4KL
PowerPC 8343 CPU at 400Mhz, revision number 0x0031
Last reset from reload
1 Gigabit Ethernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 64:00:F1:78:08:74
Part Number : 73-11027-11
PCA Assembly Number : 800-28807-11
PCA Revision Number : B0
PCB Serial Number : FOC15326R32
Top Assembly Part Number : 800-29556-06
Top Assembly Serial Number : FCZ1539C4KL
Top Revision Number : A0
Product/Model Number : AP801GN-E-K9
Press RETURN to get started!
*Mar 1 00:00:05.027: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:05.123: Warning: shutdown this internal interface will disrupt embedded AP operation!
*Mar 1 00:00:05.127: %LINK-4-NOMAC: A random default MAC address of 0000.0c05.0874 has
been chosen. Ensure that this address is unique, or specify MAC
addresses for commands (such as 'novell routing') that allow the
use of this address as a default.
*Mar 1 00:00:05.295:
Note: A random mac address of 0000.0cdd.14b0
has been chosen for BVI in bridge group 1 since there is no mac address
associated with the selected interface.
*Mar 1 00:00:05.295:
Ensure that this address is unique.
*Mar 1 00:00:05.311:
Note: A random Spanning Tree Bridge Identifier address of 0000.0c94.14c0
has been chosen for Bridge Group 1 since there is no mac address
associated with the selected interface.
*Mar 1 00:00:05.311:
Ensure that this address is unique.
*Mar 1 00:00:05.323: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 1 00:00:05.327: %SYS-5-RESTART: System restarted --
Cisco IOS Software, AP801 Software (AP801-K9W7-M), Version 12.4(10b)JDA3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Sun 07-Jun-09 04:01 by prod_rel_team
*Mar 1 00:00:05.327: %SNMP-5-COLDSTART: SNMP agent on host ap_it is undergoing a cold start
*Mar 1 04:29:01.127: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 04:29:01.823: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 04:29:02.839: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 04:29:03.823: %LINK-3-UPDOWN: Interface BVI1, changed state to down
*Mar 1 04:29:04.823: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to down
*Mar 1 04:29:11.947: %LINK-3-UPDOWN: Interface BVI1, changed state to up
*Mar 1 04:29:12.947: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
ap_it>enable
Password:
ap_it#show interfaces
BVI1 is up, line protocol is up
Hardware is BVI, address is 0000.0cdd.14b0 (bia 0000.0c05.0874)
MTU 1500 bytes, BW 1000000 Kbit, DLY 5000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
5 minute input rate 1000 bits/sec, 3 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
301 packets input, 18060 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
GigabitEthernet0 is up, line protocol is up
Hardware is PowerPC 8343 Ethernet, address is 6400.f178.0874 (bia 6400.f178.0874)
Description: the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Full-duplex, 1000Mb/s, media type is internal
output flow-control is unsupported, input flow-control is XON
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:04, output hang never
Last clearing of "show interface" counters never
Input queue: 0/1677/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 4000 bits/sec, 6 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
535 packets input, 37683 bytes, 0 no buffer
Received 507 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
17 packets output, 2196 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
