cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2898
Views
5
Helpful
3
Replies
tsgruu2000
Beginner

Apple Bonjour with 3850

Hello

Has anybody successfully implemented Apple Bonjour yet with a 3850 switch?

We have Apple TV and iOS devices connected to the same WLAN.

Unfortunately I can't see an IGMP join on the switch.

Is there a guide for the implementation of Bonjour?

According to the Multicast Guide for IOS XE I only configured the following:

wireless multicast

ip igmp snooping

ipv6 mld snooping

ap capwap multicast 239.3.3.3

wlan schuetzengarten 5 labor_wpa_psk

client vlan labor

ip multicast vlan 466

no security wpa akm dot1x

security wpa akm psk set-key ascii 0 xxxxxxxxxxxx

session-timeout 1800

no shutdown

Many Thanks!

Regards,

Urs

3 REPLIES 3
Rasika Nayanajith
VIP Mentor

IOS-XE 3.3.0 released by Cisco on 7th Oct which added mDNS features for this

Here is the config guide for this. Hope it is useful for you

http://www.cisco.com/en/US/docs/switches/lan/catalyst3850/software/release/3se/multicast/configuration_guide/b_mc_3se_3850_cg_chapter_01000.html

HTH

Rasika

**** Pls rate all useful responses ****

Does the Apple Bonjour gateway function work, even if we don't use the wireless MC/MA features on the 3850?

Our AP's are FlexConnect, managed centrally by WiSM2 & 8510's, and traffic is locally switched/routed.

Also, does it work on the upcoming 3650's as well?

simon.johnston11
Beginner
Content for Community-Ad