cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
587
Views
5
Helpful
4
Replies

APs AIR-AP1131AG-A-K9 channels distribution question.

I need to intall 04 Aps in an area where all of them have contact. I now know that the best practice is to use the three channels combination, but what would be the best way to do it? How could I use the 4 APs considering that two of them will be in an meeting room where I need to guarantee around 60 connections?

4 REPLIES 4

jeromehenry_2
Participant
Participant

I do not know the scale of your map, but can you try to play with the power level (reduce AP power level to a minimum) and the antenna type (use a low gain patch antenna to isolate the beams from each other)?

Hi,

Thanks for your feedback about the power levels, do you know where can I find the material about it? And about the antenna we haven't purchased no external antennas, so I believe that will have to deal with power level.

Rds,

Alexandre

You can do it this way:

AP-A Channel 1

AP-B Channel 6

AP-C Channel 11

AP-D Channel 1

AP-A & AP-D is where you would reduce the TX power.

http://www.cisco.com/en/US/docs/wireless/access_point/12.3_8_JA/command/reference/cr38main.html#wp2459939

You may want to also want to adjust the client power:

http://www.cisco.com/en/US/docs/wireless/access_point/12.3_8_JA/command/reference/cr38main.html#wp2459814

-Scott
*** Please rate helpful posts ***

Hi,

Thanks for your feedback.

rds,

Alexandre

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: