Assign the static ip address on the AP 1832

[faizan.mahmood]

Hi, 

I have controller and the access point are on the subnet. Due to some requirement i want to statically add the access point ip address and controller ip address into the AP. Kindly suggest me the suitable commands for this.

i used the following commands. 

capwap ap ip address 1.1.1.2 255.0.0.0

capwap controller 1.1.1.1 

is this commands correct ?

kindly help me in that

[Leo Laohoo]

Wait for the AP to join the controller and change the IP address using the GUI.  Simple.

[faizan.mahmood]

ok Leo, what if we want to change the access point  back to dhcp mode so that it automatically discover the controller. 

can you help me in that 

thanks 

[Leo Laohoo]

what if we want to change the access point  back to dhcp mode so that it automatically discover the controller. 

Again, use the GUI.

[Milos Megis]

Hi,
for controller IP address it is command "capwap ap controller ip address..."

for AP IP address you have correct command.