Autonomous WGB to CAPWAP conversion

[Wes Schochet]

Hi All-

A colleague of mine grabbed a 3702i that I have configured as a workgroup bridge and hung it in the ceiling.  I can get to it via ssh / http.   Any chance I can convert it to capwap in place.  Advice on the procedure.would be appreciated!

Wes

[Rasika Nayanajith · Accepted solution]

Hi Wes,

If you install a lightweight image (k9w8) and reload that will be a CAPWAP AP. Pls see below post for guidance

https://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/ 

HTH

Rasika

*** Pls rate all useful responses ***

[Wes Schochet]

That's the ticket - thanks!