cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
425
Views
0
Helpful
4
Replies
Highlighted
Participant

Backup & restore option- Cisco prime 2.1 to 2.2

Hi All,

I found that i have to backup 150GB size application file before reimaging to 2.2. But if i take over the network, it takes very long time (in days i guess -for 1 hour, only 500 mb it transfers). Is there any option to speed this process..? Can i directly connect any external hard disks if possible..?

 

Thanks in advance.

4 REPLIES 4
Highlighted
Hall of Fame Master

Not really:)  I have ran the process after hours and the longest it took was around 8 hours.  I don't do an application restore on PI 2.x, I export the maps and import them and build everything else as that is a cleaner safer way.  There have been a few post here with doing a restore to PI 2.2, so maybe search for that and see what they have ran into.

-Scott

-Scott
*** Please rate helpful posts ***
Highlighted
VIP Mentor

In my case it took only less than 1 hr for 96G database. (within a DC that had 10Gbps). Here is the process I followed.

http://mrncciew.com/2014/12/18/how-to-go-there-pi-2-2/ 

 

As Scott said, if you go from 1.4.x to 2.2, few issues experience by others & you can refer below thread for details.

https://supportforums.cisco.com/discussion/12390246/issue-pi-22-after-upgrade

HTH

Rasika

*** Pls rate all useful responses ****

 

Highlighted
Cisco Employee
Highlighted
Enthusiast

Check this link as mentioned earlier.

http://mrncciew.com/2014/12/18/how-to-go-there-pi-2-2/

 

 

Further more if you want fast process ,use direct connection of ISE and TFTP on same switch on Gig or fiber ports and then mention the tftp server ip as mention in the link above.

Content for Community-Ad