Wireless

cancelar
Mostrando los resultados de 
Buscar en lugar de 
Quiere decir: 
cancel

Publicaciones del foro

Hola buenas tardes, solicitando su apoyo, ya que uno de nuestros AP 1252 se bloqueó, quedando el boton de radio en verde y el de ethernet en rojo, ya lo reinicie y se queda en ese estado, trate de entrar por consola y no recibo señal y no puedo acced...

Estimados,Tengo un problema con este Access Point, cada ciertos minutos, los bota de la red  y esto es bien seguido, le actualizamos el Firmware y ahí corrigio, en gran parte este problema, pero despues de mas de un mes que volvio a botarnos de la re...

Hi,I have just set up my two 5508s with software 7.5 both are in LAG mode cross stacked to two 3750X switches (in a stack obviously). Redundancy is working great, or it was, until I went into testing the HA scenarios...Turn off the Active 5508 while ...

                   Hola,Dispondo de un 5508 con 10 APS 1141n trabajando en modo H-REAP. Hay una zona en la que ha 2 Aps con gran cantidad de clientes (se han llegado a conectar hasta 25) en que se quejan por pérdida de paquetes y lentitud de la conex...

Hi,I'm facing an issue with my autonomous AP 1140 and Apple TV. Clients connected to same SSID/VLAN cannot see Apple TV. I can ping Apple TV from clients but multicast traffic is not passing through. I've been reading that Cisco suggests to use WLC f...

drughetto por Level 1
  • 609 Visitas
  • 0 respuestas
  • 0 Útil

Hi All,We are trying to implement a wifi solution for the users whose password has expired and they are not aware of the account status.As part of the plan, we created a separate SSID "expire", so that users could connect to it. My query is - Is ther...

I'm working the wireless on our production floor and was wondering limitations with multiple directional antennas. We have a a fairly open area, outside of production equipment, but have a dividing wall approximately 1/3 of the way. We currently have...