Wireless

I got problem with my AP, here is the log please help me.BootROM - 1.78Booting from SPI flash, Secure modeBootROM: RSA Public key verification PASSEDBootROM: CSK block signature verification PASSEDBootROM: Boot header signature verification PASSEDBoo...

Hello world!As mentioned in the subject, I want to know the traffic flow of a wireless client connecting to a "Mesh MAP" which is running in Bridge+FlexMode. The client is connecting to a FlexConnect SSID, therefore traffic shall be bridged "locally"...

Hi!I was trying to find the upgrade path for the versions I mentioned on the title, but I only found articles on the upgrade path from 8.2 or 8.3, which in order to upgrade to 8.10.185.0 we first ned to upgrade to the latest 8.5.I'm wondering if its ...

Recently Cisco 1242 AP ios got corrupted and I cannot find the ios to load it. Can I get any help on this issue ?Model:- AIR-LAP1242AG-A-K9

Hi everyone,We've been having issues with our HP Pro and Elitebooks randomly disconnecting from our wireless network. We've been looking into this issue neck deep together with multiple MSP's and now our ISP as well. We've found other cases which are...

All of my access points are currently running...Software Version - 6.0.182.0Boot Version - 12.3.8.0IOS Verision - 12.4(21a)JAMini IOS - 3.0.51.0- Some of them have been having intermitent issues lately. Like some wireless users can not connect to the...

Im working connect an AP 1552 to 5508 HA-pair but despite that I added MAC to auth-list I'm receiving this message, I have been able to connect a lot of the same model without issues.Join phase statistics- Join requests received.........................

dear i want to connect to sites the distance between this sites is 4 km the location is in desert which kind off 2.4 ghz can we use please advice

Hello, I'm working with a WLC 5520 v8.10.190.0. APs are C9130AXI-A mode flexconnect. APs are configured in the same AP group. The 2.4 GHz radio is disabled and the dual 5 GHz Radio Slot 2 is disabled in the majority of the APs. I left 1 single Radio ...

Ok guys so i noticed on all the wave 2+ APs cisco are now using the U-boot bootloader and documentation for it is little to none. I have a good amount of experience recovering and restoring APs. When i deploy APs for clients i prefer to format the fl...

I am having an issue with getting some new 3702i APs to join a new 5520 WLC.  I am trying to add about 180 Aps to this controller and none of them join.  I see them trying to join in the AP Join section, but all are unsuccessful.  I have another new ...

Hey everybody!Currently I'm trying to set up my own Wifi network with multiple Air3502I-E-K9. Got 4 of them and all are running in autonomous mode(ap3g1-k9w7-tar.153-3.JD17 running on them). Now I'm trying to create a Mesh Network but I'm brutally ho...

The LED light of 3802 AP is off after registered with 9800 WLC . But the 3802 access point is still working perfectly in providing the wireless connection to the end device .  We have factory-reset the AP and issue remain the same after the AP regist...