We are operating our vehicles remotely in the underground mines over Wi-Fi, the data load from the machine is constant around 30Mbit/s (yes, six to eight HD-cameras).When switching between APs we have noticed that we sometimes get a transmission gap ...
Forum Posts
We have a 9800-CL Wireless Controller running 17.12.2. We just got a new CW9164I-ROW AP and its registered by the operational interfaces are down due to a regulatory domain error. Is there a way to change the regulatory domain for the access point?...
Good afternoon,A new client is splitting off from a parent company this Fall. They current have AP1852E-B-K9 and WLC5200 and they want to migrate to 9800-WL. I will have an instance of the 9800-WL stood up before cutover, but once the WAN is moved fr...
Hi,with some Catalyst C9164 APs we have the problem that the image is corrupt.https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/220443-how-to-avoid-boot-loop-due-to-corrupted.htmlCan the C9164 APs even u-bo...
Resolved! Cisco 9120AXE EWC Client Setup
I'm looking to add another 9120 to connect to my my 9120 running EWC. It seemed to join the EWC and it shows up as an online AP, but it shows as standby, like it's another standby EWC. It also looks as if it has both the AP and the EWC image.I was lo...
Hi all,This is my first time working with EWC, and I'm a bit confused about the joining process of the access point.First, here are the hardware components I'm working with:Access Point: C9120AXE-EEWC: C9130AXE-EWC-EVersion: 17.9.4aI don't understand...
What is Cisco Support Assistant Extension (CSAE)? Cisco Support Assistant Extension (CSAE) is the first Cisco Secure Development Lifecycle(CSDL) approved extension publically available in the Chrome store. CSAE aims to bring Cisco Support closer t...
Hi there, I encountered a strange problem today with OWE in transition mode.Suddenly a handfull of users could not see the OPEN SSID at all. But when they moved to another section of the office they got the OPEN SSID and were able to connect. After t...
I wanted to connect a Nikon Z9 and a Nikon D5/D6 (WT-6 adapter) to the Nikon Camera Control 2 Pro software via WIFI. Unfortunately the software says there is no camera. By the way, the computer is connected to the same SSID network. If I connect the ...
9800-80 pair running 17.9.4a and APSP8 (upgraded about a month ago). Upon investigating after slowness/connection complaints from the professor of a 150-seat lecture hall where 9166s are installed, I realized that every single client in the room was ...
Hi All, We are due to migrate WLC2504 along with APs to new 9800WLC setup. Based on the backup file preshared key configured is in this format. config wlan security wpa akm psk set-key hex encrypt 1 b86d3329e44d59d45b3702def381431e 379eb848c2e12fa...
This is more of a public service announcement about 9130AXIs on 17.12.3. I have a TAC case open on this but it appears that https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwh49406 is a symptom of some other bug involving cleanair on 2.4GHz with 9130...
Hello everyone,I have rather specific question about syslog on 9130 aps. I would like to activate syslog on the access points. We have a Redhat Rsyslog, and my colleague mentioned he's having some difficulties, if the syslog string doesn't include th...
Several APs are being disconnected. CAPWAP DTLS session closed for AP, cause: DTLS server session shutdown Does anyone know the cause?
Hi to all, I need the secondary POE OUT Port on the C9124 in vlan 99 RAP switch config > trunk with native vlan 201 , which is my mgmt for my access points RAP config > see picture 1 MAP config > see picture 2 I can ping RAP and MAP. VLAN Transparen...
