Hello,We are experiencing some strange behaviour on our MacOS laptops, basically we have DNAC + ISE + 9800 WLC integrated and we have posture policies for our devices, for MAC we choosing PEAP (as MAC doesn't have machine certificate as on Windows) f...
Forum Posts
We are having an issue where the guest portal is not bringing up the redirect page for authentication. We are using a Cisco WLC 5500 and use ISE version2.4.0.357 patch 8,11. On this issue, the AP in question is part of a flexconnect group with other ...
hello I'm trying to access the AP after setting up, but I can't. Is it possible to do log analysis? ap->radius server Ping communication is possible. ID/PW is also correct. When I try to connect to ssid on my device, I can't connect and the logs a...
Our topology wlc is integrated with ise and we created 2 ssids with portal redirect so after authentication success should redirect to specific website but the issue that redirection to the website is not working for android even though it is working...
Resolved! Cisco AP IOS update
hello I have a question during Cisco AP IOS Upgrade. I tried upgrading through GUI and I put C9800-AP-iosxe-wlc.bin in and I put ap1g7 in and booted it. And it does not boot and the log as below appears. ipv6 gw config loop in AC discovery...
Hi, recently I bumped into problem, laptops with windows 10 and 11 that cancelled to connect WiFi. I have ISE 3.1 with connection to Windows AD and from ISE I can see this error. Failure Reason12511 Unexpectedly received TLS alert message; treating ...
Hello!I have a WiFi network with Cisco WLC 5520 running well connecting with Cisco ISE 3.0 integrated with Microsoft AD.But I want to implement another layer in the authentication fluxe to permit that all MACs should be verified if are part of a spec...
Hello,i am trying to set up a wireless client for EAP-TLS (ISE 3.2) authetication with client/server certificate. Unfortunately the client is not happy with only both the certificates and requires ID/password. Have you stumbled upon something like th...
Hi All, We have a particular problem with our Guest WiFi portal (ISE v3) redirect. I'll try to explain the flow of events that I understand: 1. The 9800-CL virtual controller is configured to send Radius requests to ISE on Guest WiFi sign in. 2. ISE...
Hey All, We are running one cluster of 9800 that is located in the campus central DC location. Then we have several distributions that are termination points of L3 subnets. Each site within the campus is connected to one of the distribution and then ...
Hi, i have at a customer site one WLAN based on Meraki. Three SSIDs are configured: two corporate and one for guests. for the three SSIDs the authentication/authorization policies are enforced by the ISE (v3.3). The users attempting to get access to ...
Earlier this year, we migrated from the WLC 2504 to the Catalyst 9800-CL cloud wireless controller, and we have Cisco ISE as our radius server for authentication. With the old wireless controller, if someone was successfully connected to wifi (after ...
Resolved! Preauthentication ACL cisco
Helloi want to know "Preauthentication ACL " in the wlc cisco is used in the wlc regardless of switched local or switch centralized in the deployment wifi ?? i wait a reply from expert wifi Thanks
I have just replaced an AP with a newer AP and the new AP is online and working but I have no clue how to remove the old ap from the WLC and it just shows as not joined. Any help would be grateful!This is what we see
Helloi want it is correct that FlexConnect mode does not support centralized authentication only local authentication ? i wait a reply from expert wifi ?Thanks
