Can anybody tell me what exactly is the difference between the radio MAC address vs the ethernet and Wi-Fi mac addresses? What is the purpose of the radio MAC address? Apparently, wireless access points don't just have an ethernet and Wi-Fi MAC, but ...
Forum Posts
Resolved! OID - AP count
Hello,I'm looking for SNMP OID for vWLC 9800 that allows monitoring AP count connected to WLC. Is this possible? Does WLC return such counter via SNMP ?
Resolved! Deploying Cisco CMX 11.0
Hi all;Can anyone help me to find out the supported virtualization platform and version for deploying Cisco CMX 11.0?Thanks
Dear All, I have a question would like to ask regarding on the cisco anyconnect of VPN connection, in our cisco WLC we have 2 SSID. one call "Internal wifi" and i created a new SSID call "guest", and they are in seperate vlan with the ...
What is Cisco Support Assistant Extension (CSAE)? Cisco Support Assistant Extension (CSAE) is the first Cisco Secure Development Lifecycle(CSDL) approved extension publically available in the Chrome store. CSAE aims to bring Cisco Support closer t...
hello, I am trying to monitor MESH link between 2 APs on 9800. there are two problems:1. no working OID to give me up/down status of the mesh link, or SNR for the link, channel utilization.this should be clMeshNeighborLinkSnr, but does not return any...
Resolved! oeap deployment step of 9100
Hi team, Can you please suggest steps for deploying 9100 series ap as an oeap on controller 9800 wlc
Hi,Can someone explain how the traffic flow will be from client (who is connected through access points) to destination? Does traffic will flow to WLC through CAPWAP tunnel? or directly through switch?
Hello everyone,I have rather specific question about syslog on 9130 aps. I would like to activate syslog on the access points. We have a Redhat Rsyslog, and my colleague mentioned he's having some difficulties, if the syslog string doesn't include th...
Hello Team,we are using new 9800 wlc in our infraWLC-9800/ios-17.9.4aAP-Mode:Flex-connect AAA server-iseAll of sudden all clients from one particular not able to connect to wireless -corporate ssid.Clients struck in 802.1x state and error is 2024/03/...
Resolved! WLC 8510 HDD failure
We had one of our HDD fail and now the device won't boot at all. We can get into IMM and we are also able to use KVM to view the BIOS boot up and menu system. I've tried to boot off USB, CD ROM, and the other HDD but I cannot get this device to boo...
Does anyone have a Cisco 9800-L WLC Controller and successful installed a CA Signed Cert for Web Server? Not making the Certificate signing request, but actually already have the PEM and other files locally. Cisco TAC can't figure it out. The documen...
Hi guys,we are planning to use the 6Ghz band on our brandnew CW9166 APs and need to define 4 different RF profiles for various environments: for standard office / high density areas / outdoor / IoT and LABAs our experience with WiFi6E (6Ghz) is stil...
I have installed the EHWIC-4G-LTE-V in slot 0 of a 1941 router. I am currently running IOS C1900-universalk9-mz.SPA.156-3.M4.bin. When I attempt the firmware upgrade, MC7750_VZW_03.05.10.06_00.cwe, I get a failure right away. When I reload the router...
Dear All,If I have a WLC 2504 in the main site/HQ and I want to deploy an office extended AP in the remote site.Can I tunnel the internet traffic so the remote site (Office extended) will have the same IP location as the main site?For example if the ...
