Wireless

I am trying to understand Guest Anchoring with the 9800 Controllers. In the 5500 series WLCs you had to access the WMI from the inside network through the firewall to the Anchor Controller Mgmt Vlan on a DMZ.  Then create another sub-interface on the...

I am using one of the LAN ports on the 1815W WAP. The LAN port is being used for video (live TV). TV media set up uses some kind of multicasting. The video gets pixel issues every 30-45 seconds where the image gets distorted. Kind of like packet loss...

We are building an AP regex for our AP's so that they can be assigned to a different site-tag.Our AP naming convention is like this: <SER name>-<FLOOR>-<NUMBER>We want to only match on the FLOOR number.As far as I understood  you can achieve this wit...

I'm trying to complete a lab in packet tracer and one of the bullet points that we have to complete is "Configure laptop, tablet, and smartphone to be able to connect to the wireless network through one of the LAPs" The LAPs are already connected to ...

Hi everyone,our C9800-CL controller is configured with HA, and everything appears to be functioning properly. However, I've recently observed that we're unable to view the stats of clients connected off the Fexconnect profiles. We have one local mode...

Hey all, my team and I have been contracted out by a regional MSP to perform some network moves and I have been asked to head it up as our main network guy is taking an extended vacation. I have a few questions as I want to ensure success.We are movi...

  What is Cisco Support Assistant Extension (CSAE)? Cisco Support Assistant Extension (CSAE) is the first Cisco Secure Development Lifecycle(CSDL) approved extension publically available in the Chrome store. CSAE aims to bring Cisco Support closer t...

Hi,We have C9800-CL running in production, currently version 17.09.04a, I upgraded to version C9800-CL-universalk9.17.13.01.SPA.bin, through GUI, we pre-download first the firmware to the currently connected AP 9120, as you can see on the screenshots...

Problem with Guest user captive portal redirection problem. Looking for the help in WLC. Guest user -> Cisco AP -> WLC -> ISE - This problem is happening for one particular site. Other sites captive portal is working properly from the same ISE server...

hello, I am trying to monitor MESH link between 2 APs on 9800. there are two problems:1. no working OID to give me up/down status of the mesh link, or SNR for the link, channel utilization.this should be clMeshNeighborLinkSnr, but does not return any...

Hi, Under Access Points ---->Radios, there are four items. The first one is 5GHz and second is 2.4GHz, third is 2.4GHz and fourth is 5GHz. Please see the below picture. This ap is 3702, I can see the ap at item 1 and 2, but i cannot see the ap at ite...

Sorry for the long post. We're having a complicated issue I'm hoping someone can shed some light on.We recently migrated uplinks for our (3) SSO 8540 WLCs (8.10.190.6) and (2) SSO 9800 WLCs (17.9.4a/APSP8) off a 6500 VSS pair and onto a 9500X stacked...

if on the 5500 wlc, i check a wifi client statistic, and the SNR = 0 but the RSSI  = -50 meaning what??is it the Signal level from AP is v good, yet the environment noise v high causing the overall signal to be poor?does a SNR =0 resulting any issue ...