Hey Guys, i was wondering if there is a way to allow Lobby admin to create a guest user where he would be able to specify that user is allowed to only join specific SSID. Ie: i have 2 SSIDS (webauth1 and webauth2) Lobby admin logs into the wlc and cr...
Forum Posts
Hi there, I encountered a strange problem today with OWE in transition mode.Suddenly a handfull of users could not see the OPEN SSID at all. But when they moved to another section of the office they got the OPEN SSID and were able to connect. After t...
Creating a BYOD policy using ISE and a WLC. I have everything working except i'm missing something with the FlexConnect ACL defined.In the attached example, the goal is to allow communication to the ISE servers (172.30.10.81/80) as well as DHCP/DNS ...
Hi all;Consider the following scenario: After clicking on the Generate button, nothing is displayed on the right of the form (the content of the CSR). I have tested this situation with the latest versions of Firefox and Chrome...Any ideas?Thanks
Hello,I am interested in using a WLC anchor on a (FW segregated) OT network to enable a SSID for the OT wireless segment. Is there any existing Cisco architecture or guidance for doing this?
Hithere was WLC2500+AP1800+ISE working well with dynamic vlan.Now, we begin to migrate APs to WLC 9800 with local mode. all other is working well, but dynamic vlan.we have vlan 28 and 29, vlan 28 is configured as default vlan in wlc9800 policy. ISE l...
Hi, I checked several guides how to deploy LSC on C9800 WLCs (https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9100-access-points/221127-configure-locally-significant-certificat.html / https://www.cisco.com/c/en/us/support/docs/wireless-m...
Does any know how to recover root password on NCS?Sent from Cisco Technical Support iPad App
Can I use LDAP to access the 9800 GUI / CLI?
After given username and password error showing Can't connect to the network. After many times retries then it connected.(Facing in many system) System: WINDOWS 11 WLC :Cisco Catalyst 9800-L (17.9.3) ISE:3.1.0.518 patch 7 Help me
Resolved! Air-Ap3802E-E-K9
Hi guys, I have a 3802E AP currently running CAPWAP that I need to convert to Mobility Express. I have checked relevant suggestions and documentation from Cisco for steps. Below is the version of software running on it(see picture). I am unable to ru...
Hi All I'm debugging a EAP-TLS issue at the moment, between some iPads a WLC 8540 with 8.10.181.3 and 2800 APs. It works with 2700 AP models on this WLC, but nearly always fails with 2800 APs. I've now captured the radius communication between the WL...
I understand that Cisco ACS is no longer a supported product, and we are in the process of installing and migrating over to Cisco ISE. However, we have been facing an issue whereby we are unable to get any Android 11+ devices connected to our network...
Hi all,I currently configure wlc9800 with 4 ssid on it. In one of the wlan I use radius server for domain users to authenticate but I need to restrict them to connect only with their workstation laptops or tablets. I have all wlan MAC addresses avail...
Resolved! dACL scalability for C9800-L
This document (Cisco Catalyst 9800 Series Wireless Controller Software Configuration Guide, Cisco IOS XE Dublin 17.10.x - Downloadable ACL [Cisco Catalyst 9800 Series Wireless Controllers] - Cisco) contains a table giving de ACL and ACE scale for Cat...
