09-23-2013 07:38 AM - edited 07-04-2021 12:54 AM
Hello, I would like information on binding multiple intefaces from the WLC to a Cisco switch for more bandwidth. Can someone point me in the right direction for this? thank you
Solved! Go to Solution.
09-23-2013 07:42 AM
One more doc:
https://supportforums.cisco.com/docs/DOC-23515
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
09-23-2013 07:41 AM
Here are some links. You need to have LAG enabled on the WLC and then you need to create an etherchannel to your switch. You can connect the WLC to multiple switches if they are in VSS.
https://supportforums.cisco.com/docs/DOC-20587
http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_ports_interfaces.html
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
09-23-2013 07:42 AM
One more doc:
https://supportforums.cisco.com/docs/DOC-23515
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
09-23-2013 07:57 AM
Thanks these should do it for me.
09-23-2013 08:25 AM
No problem... thanks for rating!
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide