bsnInitRcbSlot: slot 0 has venus radio(UNSUPPORT)

[shawntls82]

Hi All,

I'm trying to join an AIR AP-1220B-A-K9(converted to lightweight mode) to the WLC but it keeps looping on the JOIN and CFG state. Below are the output from console:

*Nov 16 17:13:56.792: %CAPWAP-5-SENDJOIN: sending Join Request to 10.253.201.48

*Nov 16 17:13:56.792: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN

*Nov 16 17:13:57.360: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG

*Nov 16 17:14:15.596: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.253.201.48:5246

*Nov 16 17:14:15.840: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Nov 16 17:14:15.840: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Nov 16 17:14:15.840: bsnInitRcbSlot: slot 0 has venus radio(UNSUPPORT)

*Nov 16 17:14:15.882: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down

*Nov 16 17:14:16.977: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down

*Nov 16 17:14:17.019: bsnUnlockDevice: not bring radio up: radio 0 is in admin disable state

*Nov 16 17:14:17.065:  status of voice_diag_test from WLC is false

*Nov 16 17:14:17.065: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset

*Nov 16 17:14:17.092: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up

*Nov 16 17:14:18.093: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up

*Nov 16 17:14:27.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.253.201.48 peer_port: 5246

*Nov 16 17:14:27.001: %CAPWAP-5-CHANGED: CAPWAP changed state to

*Nov 16 17:14:28.797: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.253.201.48 peer_port: 5246

*Nov 16 17:14:28.798: %CAPWAP-5-SENDJOIN: sending Join Request to 10.253.201.48

*Nov 16 17:14:28.799: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN

*Nov 16 17:14:29.361: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG

*Nov 16 17:14:47.597: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.253.201.48:5246

*Nov 16 17:14:47.837: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Nov 16 17:14:47.838: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Nov 16 17:14:47.838: bsnInitRcbSlot: slot 0 has venus radio(UNSUPPORT)

*Nov 16 17:14:47.956: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down

*Nov 16 17:14:48.095: bsnUnlockDevice: not bring radio up: radio 0 is in admin disable state

*Nov 16 17:14:48.141:  status of voice_diag_test from WLC is false

*Nov 16 17:14:48.142: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up

*Nov 16 17:14:48.144: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset

*Nov 16 17:14:48.165: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up

*Nov 16 17:14:58.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.253.201.48 peer_port: 5246

*Nov 16 17:14:58.001: %CAPWAP-5-CHANGED: CAPWAP changed state to

*Nov 16 17:14:59.789: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.253.201.48 peer_port: 5246

*Nov 16 17:14:59.790: %CAPWAP-5-SENDJOIN: sending Join Request to 10.253.201.48

*Nov 16 17:14:59.791: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN

*Nov 16 17:15:01.273: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG

Has anyone encounter this before, appreciate help and advise on this issue.

Thanks.

[George Stefanick]

If your Ap has 802.11b radio it will not work. Requires 802.11g radio. Also what code is on your wlc ?

1200 won't work past 7.0 code ..

Sent from Cisco Technical Support iPhone App

[shawntls82]

Hi George,

Thanks for your reply, I've checked the internal antenna card and it was this model AIR-MP20B 2.4Ghz, the 5Ghz antenna adapter is AIR-RM22a-AK9.

Does this means the internal 2.4Ghz radio card will not work with the controller?

[George Stefanick]

I recall from way back that 802.11b radios arent supported. I also notice this from your cpature:

*Nov 16 17:14:17.019: bsnUnlockDevice: not bring radio up: radio 0 is in admin disable state

My hunch is that you need to upgrade that radio before she will join or remove that radio and see if that fixes the join process.

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

[shawntls82]

Hi George,

I think you are right, once I removed the internal radio AIR-MP20B, it joins to the WLC with the RM22A-A-K9 5Ghz antenna adapter.

I've also swapped the internal radio with AIR-MP21G-E-K9 and both radio joins to the WLC normally.

Therefore, I guess that the AIR-MP20B is not supported.

[George Stefanick · Accepted solution]

Shawn,

Excellent.. If you find this helpful please support the rating system by marking your question as answered. This will help others find a quicker resolve to their issues.

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."