Btnet - Site A Ciscso Meraki - Site B Cisco C1101 -p4 Breakout Site A

[niafo1999]

Apologies, really struggling for help on this. New Service - Btnet Site A - Cisco Meraki Router - Connected to Pfsense Firewall.   WIFI Enabled all good. 

Site B - Cisco C1101 Router  been advised NO WIFI  - How can I get Wifi on this router as it connects to Site A for Internet breakout. 

Any help would be greatly appreciated.  Cisco C1101 is supposed to have wireless or am I wrong? TIA 

[pieterh · Accepted solution]

Cisco 1100 Integrated Services Router - Cisco

• The Cisco 1000 ISR product line contains several models.
• Specifications can be found in the Cisco 1000 Series Integrated Services Routers Data Sheet >

search for the exact model in the datasheet,

this information shows  that your model does have LTE-wireless using a dongle (but that is not what you need )
It doesn't have Wi-Fi, and adding an optional  Wi-Fi module is not possible
-> your options are to trade-in for a model with Wi-Fi or use an external access point

[niafo1999]

Thanks I used a dirty solution of adding an AP without DHCP and static IP to the Switch creating a bridge. THanks for your help I sincerely appreciate it.