C9800: show radio coverage information on CLI

[Johannes Luther]

Hi wireless professionals,

in the C9800 GUI, there are radio statistics for each radio. The details of a radio shows the "Coverage Information", which tells whether the "Coverage Profile" or "Interference Profile" is "Passed" or "Failed".

There are statistics for the load profile and traffic utilization as well (Monitoring > Wireless > Radio Statistics).

Question: What's the corresponding CLI command to get this data?

[Sandeep Choudhary]

Check here:

https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-5/config-guide/b_wl_17_5_cg/m_configuring_ndp-mode_on_access_point.html?bookSearch=true#Cisco_Task_in_List_GUI.dita_95990f61-4139-4c0c-86f4-7d59ad782ea2

Regards

Dont forget to rate helpful posts

[Arshad Safrulla · Accepted solution]

show ap auto-rf dot11 24ghz or 5ghz

[Arshad Safrulla · Accepted solution]

If you want to filter per AP

9800-CL-LAB#show ap name <APName> auto-rf dot11 24ghz