C9800 WLC flexconnect client vlan into native AP vlan

[merilcerpos]

we want to configure FlexConnect Profile for 3 SSIDs on different access switches. Each access switch has a different native vlan.

• flexconnect SSID1: vlan 200
• flexconnect SSID2: vlan 300
• flexconnect SSID3: the native vlan of the switch, which is varying depending on switch

how can this be configured on the wlc with a common flexconnect profile, without using for each access switch a different flex profile for SSID3?

Access Switch A:

• native vlan 100
• switch port configuration for AP port: native vlan 100 for AP
• trunk allowed vlan on switchport 100, 200, 300

Access Switch B:

• native vlan 101
• switch port configuration for AP port: native vlan 101 for AP
• trunk allowed vlan on switchport 100, 200, 300

[balaji.bandi]

as per my views, you need to create new VLAN for SSID3, example VLAN 110

[Rich R]

Either use a new VLAN for SSID like @balaji.bandi said otherwise you will need a different profile for each.