11-22-2019 12:03 PM - edited 07-05-2021 11:20 AM
Hi guys, i try to configure this equippament for use wi-fi , but i dont know how change a original mode for a stand alone.
any body knows how to solve this?
11-22-2019 12:41 PM
Hello.
You must change firmware from LAP to Autonomous, You must have tftp server. I use FreeBSD with alias on interface 10.0.0.2 , then press MODE button and connect power to AP. And view message on console , and view log on TFTP server. Your AP try to get xxx.default firmware from TFTP. Rename autonomous firmware to this and put it to TFTP and try to upgrade again
11-22-2019 02:50 PM
here is good guide convert to Autonomous mode :
https://mrncciew.com/2013/12/13/ap-conversion-using-mode-button/
11-22-2019 07:44 PM
11-23-2019 03:37 AM
good morning ,yeah, how do i take this contract? because the product support is over and hes dont give me the firmware.
does If i take contract they give me an archive?
11-23-2019 06:34 AM
contact local cisco partners to help you with the contract or smartnet contract.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide