07-19-2010 04:03 PM - edited 07-03-2021 06:59 PM
Hello,
I have two WLC4404 with version 6.x in the same VLAN, same mobility group, same SSID, same interfaces, of course, with different IP Address, just the Virtual IP Address is the same in both devices. Well, I cannot access via GUI the second WLC, but when I turn off the first WLC1, then I can access second WLC.
If both of them are connected, I just can access WLC1, but not WLC2.
Any ideas?
Thanks
07-20-2010 06:41 AM
Is the PC you are using to access the controller's GUI attached to the network wirelessly? You may have to enable management via dynamic and access the second controller through its dynamic interface.
07-20-2010 07:48 AM
I forgot to say that Mgmt via wireless is enabled on both controllers, also, the same thing happens
when you try to reach the controller vi ethernet cable.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide