cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2021
Views
25
Helpful
13
Replies

Catalyst 9300-48UN prevent APs to contact 9800 WLC

sorvarit
Level 1
Level 1

Have a new Catalyst 9300-48UN with all bells and whistles and it seems to act as a WLC regardless if the package is installed or not. Have tried a CAP2702 and it can connect to our standalone 9800 WLC, but neither 2800 or 9100 series APs will reach it. Looks like if it use Cisco U-Boot it may be affected.

A 9120 will boot up and in the end hang on this going on forever:

[*02/22/2022 10:33:58.9210] NOTE: Using Port Grouping for IMP ports : [ 0 --> 4 ] [ 1, 2 --> 5 ] [ 3, 7 --> 8 ]
[*02/22/2022 10:33:58.9210] wired0 (Ext switch port: 7) (Logical Port: 15) (phyId: 1f) Link DOWN.
[*02/22/2022 10:33:58.9210] ===> Activate Deep Green Mode
[*02/22/2022 10:33:58.9210] bcmswlpbk0 (Ext switch port: (Logical Port: Virtual link DOWN
[*02/22/2022 10:34:01.0270] NOTE: Using Port Grouping for IMP ports : [ 0 --> 4 ] [ 1, 2, 3 --> 5 ] [ 7 --> 8 ]
[*02/22/2022 10:34:01.0280] wired0 (Ext switch port: 7) (Logical Port: 15) (phyId: 1f) Link Up at 2500 mbps full duplex
[*02/22/2022 10:34:01.0280] <=== Deactivate Deep Green Mode
[*02/22/2022 10:34:01.0280] bcmswlpbk0 (Ext switch port: (Logical Port: Virtual link

Any clues whats going on? Tried looking for simple images for the 9300 without all packages we dont need now. 


 

13 Replies 13

marce1000
Hall of Fame
Hall of Fame