cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
292
Views
0
Helpful
1
Replies

Change config WLC to 5 Ghz and n/ac only

alams
Beginner
Beginner

Dear all,

 

Please, need your advice about this,

my user ask me to change the wlc configuration to 5 ghz only with n/ac only.

they said their end-points (smartphone and notebook) are support with n/ac and 5 ghz.
what the impact if we deploy this configure ?

 

and what the different with speed on wi-fi status and your internet speed ?

Thank You ...

 
 
 
1 Reply 1

Rasika Nayanajith
VIP Mentor VIP Mentor
VIP Mentor

It is a good idea if you can limit your SSID to 5GHz only. 

 

Under WLAN -> General -> Radio Policy -> select 802.11a only

 

Data rates you get depend on AP/Client channel width (20,40,80) support, Spatial stream support (1,2,3) and SGI/LGI (0.4 or 0.8 micro seconds) and MCS (Modulation & Coding Scheme)

http://mcsindex.com/ 

 

For client capability, refer below page

https://clients.mikealbano.com/ 

 

HTH

Rasika

*** Pls rate all useful resposnes ***

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers