10-16-2018 05:39 AM - edited 07-05-2021 09:18 AM
Hello,
we needed to change to WPA2-PSK, therefore we changed from AP1242AG to AP1852.
We have 13 AP1852, one of them is the Primary Controller.
We had following constellation:
Cisco 1242AG --> WLAN WEP --> Siemens Scalence 774 WLAN Client --> Siemens Microbox und S7 315
We changed the 1242APs with WEP to 1852 Aps with WPA2-PSK.
Now we have the Problem, that we can't reach the WLAN Clients and the S7 over Wlan.
We can't Ping them.
With the old 1242 it is no problem.
Someone an Idea ?
Regards, George
10-16-2018 02:34 PM
@George Hill wrote:
we needed to change to WPA2-PSK, therefore we changed from AP1242AG to AP1852.
Do the clients actually support WPA2 PSK?
Do the clients authenticate to the SSID?
10-17-2018 01:50 AM
Yes, the Siemens Wlan- Bridge supports WPA2-PSK and authenticated to the SSID.
On the Ethernet- Side of the Wlan- Bridge are 2 Clients, the S7 and a Microbox- PC, this equipment we can not ping..
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide