01-08-2007 12:04 AM - edited 07-03-2021 01:27 PM
I use the following config
!
dot11 ssid VU-Campusnet
vlan 104
authentication open eap Dot1x-Authentication
authentication key-management wpa optional
accounting Dot1x-Accounting
guest-mode
!
dot11 aaa csid ietf
dot11 network-map
power inline negotiation prestandard source
!
!
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption vlan 104 key 3 size 128bit 7 xxx transmit-k
ey
encryption vlan 104 mode ciphers aes-ccm tkip wep128
!
encryption vlan 208 key 3 size 128bit 7 xxx transmit-k
ey
encryption vlan 208 mode ciphers aes-ccm tkip wep128
!
encryption vlan 802 key 3 size 128bit 7 xxx transmit-k
ey
encryption vlan 802 mode ciphers aes-ccm tkip wep128
!
encryption vlan 997 key 3 size 128bit 7 xxx transmit-k
ey
encryption vlan 997 mode ciphers aes-ccm tkip wep128
!
ssid VU-Campusnet
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0
54.0
channel 2462
station-role root
rts threshold 2312
no dot11 extension aironet
no cdp enable
!
On the tested Wlan interface from Intel it works. But when we use the Sitecom WL170 or WL112 it won't. can some one help me...
01-12-2007 07:27 AM
Try disabling Aironet Extensions and check if it works. Aironet extensions are cisco proprietary and does not work with 3rd party clients. For more information on Aironet Extensions read http://www.cisco.com/en/US/products/hw/wireless/ps430/products_configuration_guide_chapter09186a0080606d4a.html#wp1135928
01-13-2007 02:24 PM
this is already done in the config
do you have a other idee
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide